The syntax for the web-server command is
Web-server {enable | disable}
Run the web-server command in Global Configuration command mode.
"Web-server parameters" (page 107)
variables for the web-server command.
web-server parameters
Parameters
and variables
enable | disable
no web-server command
The no web-server command disables the Web server used for
Web-based management.
The syntax for the no web-server command is
no Web-server
Run the no web-server command in Global Configuration command
mode.
Setting boot parameters
The command described in this section is used to boot the switch or stack
and to set boot parameters.
boot command
The boot command performs a soft-boot of the switch or stack.
The syntax for the boot command is
boot [default] [unit <unitno>]
Run the boot command in Privileged EXEC command mode.
Copyright © 2007, Nortel Networks
.
Description
Enable or disable the Web server.
Nortel Ethernet Routing Switch 4500 Series
Overview — System Configuration
NN47205-500 02.01 Standard
5.0 23 February 2007
Setting boot parameters 107
describes the parameters and
Nortel Networks Confidential