Nortel 4500 Series Overview-System Configuration page 113

Custom Banner tab
Use the Custom Banner tab to customize the CLI banner display.
To customize the banner display, perform the following procedure.
Step
1
2
Edit Chassis screen--Custom Banner tab
The following table
Banner tab fields.
Custom Banner tab
Field
Type
Id
Line
Copyright © 2007, Nortel Networks
.
Action
Open the Edit Chassis screen in the manner detailed at the
beginning of this section.
Select the Custom Banner tab, as shown in
Custom Banner tab" (page
"Custom Banner tab" (page 113)
Description
Identify the banner type. Two banner types are
available: one type is used in switch or stand-alone
mode while the other is used in the stack mode.
Identify the line of text within a custom banner
Display one line of a 19-line banner. If the line contains
non printable ASCII characters, then the line is rejected
and an error message is returned.
Nortel Ethernet Routing Switch 4500 Series
Overview — System Configuration
NN47205-500 02.01 Standard
5.0 23 February 2007
Customizing the CLI banner 113
" Edit Chassis screen --
113).
—End—
describes the Custom
Nortel Networks Confidential