Ip Arp Tab - Nortel 4500 Series Overview-System Configuration

IP Addresses tab
IP Addresses tab fields
Field
Addr
NetMask
BcastAddr
ReasmMaxSize

IP ARP tab

The Address Resolution Protocol (ARP) tab contains the MAC addresses
and the associated IP addresses for the switch.
To open the ARP tab from the Device Manager main menu, perform the
following procedure.
Step
1
2
3
4
Copyright © 2007, Nortel Networks
.
Description
The device IP address.
The subnet mask address.
The value of the least-significant bit in the IP broadcast address
used for sending datagrams on the (logical) interface associated
with the IP address for this entry. For example, when the Internet
standard all-ones broadcast address is used, the value will be
1. This value applies to both the subnet and network broadcasts
addresses used by the entity on this (logical) interface.
The size of the largest IP datagram that this entity can reassemble
from incoming IP fragmented datagrams received on this interface.
Action
Select Edit. The Edit selection list appears.
Select IP. The IP Globals tab appears.
Select the ARP tab. The ARP tab opens.
Click Refresh to refresh the tab information display.
Nortel Ethernet Routing Switch 4500 Series
Overview — System Configuration
NN47205-500 02.01 Standard
5.0 23 February 2007
General Switch Administration using the JDM 211
—End—
Nortel Networks Confidential