166 Power over Ethernet
"Port Property fields" (page 166)
fields.
Port Property fields
Item
Port
Admin. Status
Current Status
Classification
Limit (W)
Priority
Copyright © 2007, Nortel Networks
.
Description
The port number.
Set the power status to one of the following:
•
Enabled
•
Disabled
The default value is Enabled.
The current status of the port, which is one of the
following values:
•
Disable
•
Detecting
•
Detected
•
Delivering Power
•
Error
•
Invalid PD
•
Test
•
Deny Low Priority
•
Overload
The operational status of the port PD classification.
Set the maximum power that the switch can supply to
a port. The default value is 16W.
Set the priority of a port. The Priority of a port is used
to detect the ports that can be dropped when the power
requirements exceed the available power budget.
The priority that can be assigned to a port can be one
of the following:
•
Low
•
High
•
Critical
Nortel Ethernet Routing Switch 4500 Series
Overview — System Configuration
NN47205-500 02.01 Standard
5.0 23 February 2007
describes the items on the Port Property
Nortel Networks Confidential