Configuring Bootp, Ip, And Gateway Settings; Nortel Ethernet Routing Switch 4500 Series - Nortel 4500 Series Overview-System Configuration

200 Switch administration tasks
Configuring BootP, IP, and gateway settings
You can configure and modify BootP mode settings for in-band stack and
in-band switch IP addresses, in-band subnet mask parameters, and the
IP address of your default gateway.
To configure BootP, IP, and gateway settings, perform the following
procedure.
Step
1
Copyright © 2007, Nortel Networks
.
Note: Settings take effect immediately after you click Submit.
Action
To open the IP screen, select Configuration > IP , as illustrated
in"IP page for a stand-alone Nortel Ethernet Routing Switch 4500
Series" (page 200)
IP page for a stand-alone Nortel Ethernet Routing Switch 4500 Series

Nortel Ethernet Routing Switch 4500 Series

Overview — System Configuration
NN47205-500 02.01 Standard
5.0 23 February 2007
—End—
and "IP page for a stack" (page 201).
Nortel Networks Confidential