Attaching The Brackets To The Contivity 100 Unit; Figure 3 Components For Mounting The Contivity 100 Unit On A Wall - Nortel Contivity 100 Setting Up

Figure 3 Components for mounting the Contivity 100 unit on a wall

1
LEGEND
1 Hole drilled in the wall
2 Plastic expansion lug

Attaching the brackets to the Contivity 100 unit

Before you begin mounting the unit on a wall, you must attach the brackets to the
unit.
To attach the brackets to the Contivity 100 unit:
1
Remove the three screws from the cover on each side of your unit as shown in
Figure
Chapter 2 Contivity 100 unit hardware installation
2 3
3
4
4.
4
Wall mounting bracket
Self-tapping drywall screw or #6 wood screw
Setting Up the Contivity 100 Unit
39
10095EA