Siemens SINUMERIK Series Function Manual page 4

Preface
Target group
This publication is intended for project engineers, programmers, technologists (of
machine manufacturers), and system startup engineers (of systems/machines).
Benefits
The Function Manual describes the functions so that the target group is familiar
with and can select them. It provides the target group with the information required
to implement the functions.
Utilization phase: Planning and configuration phase, implementation phase, setup
and commissioning phase
Standard version
Extensions or changes made by the machine manufacturer are documented by the
machine manufacturer.
Other functions not described in this documentation might be executable in the
control. This does not, however, represent an obligation to supply such functions
with a new control or when servicing.
Further, for the sake of simplicity, this documentation does not contain all detailed
information about all types of the product and cannot cover every conceivable case
of installation, operation or maintenance.
Technical Support
You can find telephone numbers for other countries for technical support in the
Internet under "Contact" www.siemens.com/automation/service&support
iv
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
03/2012
