Siemens SINUMERIK Series Function Manual page 129

03/2012
Function
Alarms
Initiate
trigger for
the following
alarms
Exclusion list
Exclude the
following
alarms
Conditions
Note
If an alarm occurs, an action is only initiated if the PLC condition described here
occurs at the same time. If an alarm is pending and the condition is met after this,
the action will not be initiated.
See also Section: Machine trigger on "PLC variable"
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
Enter the alarms to be initiated:
List of individual alarms separated by commas or
alarm number areas separated by "–".
Enters the alarms that must not result in initiating:
List of individual alarms separated by commas or
alarm number ranges separated by "–".
Opens the submenu for entering a PLC condition.
3 Setting up functions
3.4 Fault services
Type
DISPLAY
INPUT
(max. 200
characters;
any numer-
als permis-
sible)
, and – are
permissible
special
characters)
INPUT
ACTION
3-129