Siemens SINUMERIK Series Function Manual page 109

03/2012
Message
"Do you want to accept the chan-
ges, and check with an axis test?"
"Do you want to accept the chan-
ges, but not check an axis test?"
"Do you want to reject the chan-
ges?"
NOTICE
The option not to perform a manual axis test again in order to retain the "Tested"
marking despite changes to data relevant for the axis test, must be enabled in the
organizational data.
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
3.2 Configuring measurements and measurement series
Meaning
If the axis test has already been performed
successfully, it is marked as "Tested".
If you press the "Select" softkey, "Tested" is reset
and a one-time successful execution of the axis
test is required in order to be able to also execute
this automatically
(e.g. via maintenance schedules).
If the axis test has already been performed
successfully, it is marked as 'Tested'.
If you press the "Select" softkey, "Tested" is
not reset and a new axis test is not required.
Currently executed changes are rejected. If
the axis test has already been performed
successfully, it is marked as "Tested". If you
press the "Select" softkey, "Tested" is not
reset and a new axis test is not required.
3 Setting up functions
3-109