Trigger On Malfunctioning Control Monitors - Siemens SINUMERIK Series Function Manual

3 Setting up functions
3.4 Fault services
Function
Interval bet-
ween triggers

3.4.19 Trigger on malfunctioning control monitors

In order to automatically check for malfunctions in the configuration, the trigger on
"Control monitor script error" can be set up.
Every configured action, which does not result in the expected result, is signaled as
case. This can be an access to a non-existent variable or any other incomplete
configurations.
Fig. 3-49: Trigger on script error
Function
Name
3-164
Description
This time should approximately correspond to
the set synchronization time.
Description
Name of the trigger; can be entered by the user.
If the field remains empty or is deleted, the sys-
tem will generate a name.
If the name already exists, a consecutive num-
ber is automatically added in parentheses.
If the name is too long, the number added can
only be seen in a tooltip.
ePS Network Services, Function Manual (FH) - 03/2012
Type
DISPLAY
INPUT
(max.
10-digit)
Type
DISPLAY
INPUT
(max. 100
characters,
all characters
are permissi-
ble)
© Siemens AG 2012 All Rights Reserved
03/2012