03/2012
3.5 Global settings
3.5.1 Setting the notification limit
Function description
The notification limit function enables a repeated delay to be set for the specifiable
time span, during which no notifications are sent after the initial one. This prevents,
for example, a glut of alarms being output in the event of a faulty configuration, or
trigger signals.
Fig. 3-70: Setting the notification limit
Function
Status
Do not send any
messages for
Note
When the notification limit is active, all events are recorded in the event history.
However, the first notification is sent within the set time window in order to pre-
vent, if necessary, an overflow in the mailbox.
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
Switches the notification limit for the machine on/off.
Note:
This setting is activated immediately after storage of a chan-
ge.
Time for the notification limit
1 to 1440 minutes
1 to 24 hours
3 Setting up functions
3.5 Global settings
3-187