Siemens SINUMERIK Series Function Manual page 108

3 Setting up functions
3.2 Configuring measurements and measurement series
The following prompt is displayed if a manual axis test is not performed after chan-
ges in the prolog and epilog:
Fig. 3-18: Prompt after changes in the prolog and epilog
The following prompt is displayed if a manual axis test is not performed after chan-
ging axis-specific parameters:
Fig. 3-19: Prompt after changing axis-specific parameters
3-108
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
03/2012