Siemens SINUMERIK Series Function Manual page 31

03/2012
NC status data
NC status data uploaded with an event can be displayed in the browser and com-
pared with other NC status data.
Fig. 2-10: NC status data display
Function
Display NC status
data
Compare data
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
You can display and evaluate the content of the NC
status data in a table and evaluate it.
Notice:
The NC status data reproduces the status of the relevant
NC variables after an event occurs. For some events
(e.g. RESET alarms) there is a danger of misinterpreta-
tion as the event itself influences the variable value (ex-
ample: pointer to current block is reset by alarm).
You can compare the NC status data record currently
selected with another data record. The system offers
you a list of all available NC status data records of the
currently selected machine. The values of the NC status
data records are listed next to each other for each vari-
able for comparison purposes. A variable with different
values in the original data record and the data record
you are comparing with is highlighted. The event is dis-
played for each NC status data record, together with the
event details and time stamp.
It is possible to only display differences. The system
then hides all variables with identical values in the
original data record and data record being compared.
2 Machine Information
2.1 Machine overview
2-31