Siemens SINUMERIK Series Function Manual page 154

3 Setting up functions
3.4 Fault services
Fig. 3-44: Example, PLC variable - cyclic trigger
Function
View
Name
Status
Trigger
Interval
Remainder
[ ]
Delete
Add
Dependent
on start date
3-154
Description
Name of the variable.
Counter status, corrected by ePS Network Ser-
vices, for current absolute variable content.
Current status for the next initiation, either speci-
fied by an entry or automatically calculated and
entered by ePS Network Services at interval
change
Interval value
Numeric and graphic display of the remaining
count units (as a percentage) until the next initia-
tion.
Unit of the counter.
Removes the counter from the server trigger.
Adds another NC variable counter to the server
trigger.
This label specifies the dependency of the start
date for maintenance.
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
03/2012
Type
DISPLAY
INPUT
(max. 100
characters; all
characters are
permissible,
exception <)
DISPLAY
DISPLAY
INPUT
(With ePS
Network
Services
update)
DISPLAY
INPUT
(Up to a max.
of 9 digits)
DISPLAY
DISPLAY
ACTION
ACTION
DISPLAY
SELECTION
(Toggle)