Siemens SINUMERIK Series Function Manual page 171

03/2012
Function description for "Creating a maintenance job"
The workflow action is used to create maintenance jobs on the basis of the control
monitor trigger event. To create an order, a maintenance schedule is used as a
template.
See also Section: Maintenance
Note
If a maintenance job is created by a control monitor, it is always assigned the due
date "immediately/today".
Fig. 3-56: Selecting a maintenance schedule for control monitor
Function
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
Description
From here, it is possible to switch directly to the crea-
tion of a new maintenance schedule.
Open and edit an existing maintenance schedule
Note:
Changes to the maintenance schedule only affect new
jobs. Jobs that are already open and are, therefore,
already being carried out, as well as jobs that are clo-
sed, remain documented in their original state.
Notice:
Renaming a maintenance schedule results in auto-
matic reprogramming of all control monitors in the
background where the schedule is configured. Conse-
quently, it is not possible to create all of the required
control monitors successively on the basis of a single
plan.
3 Setting up functions
3.4 Fault services
Type
ACTION
ACTION
3-171