Copying Functions To Several Machines - Siemens SINUMERIK Series Function Manual

3 Setting up functions
3.6 Copy

3.6.2 Copying functions to several machines

Function description
This function copies any selection of configurations that the user has created pre-
viously from a so-called source machine to a freely definable group of machines on
a 1:1 basis.
Single or several user functions can be copied concurrently or successively. Any
source machine and any target machines to which the user has access can be se-
lected for copying.
Fig. 3-79: Copying to several machines
Function
Source machine
+/-
3-198
Description
All configurations are listed in groups.
Selecting a group displays all configurations
contained within the group and preselects
them for copying. This preselection can be
switched on and off by selecting the group.
Selecting +/- displays the configurations in a
group or hides the display.
The preselection for copying is made by se-
lecting an individual configuration. The prese-
lection can be switched on and off by selecting
an individual configuration.
ePS Network Services, Function Manual (FH) - 03/2012
Type
DISPLAY
SELECTION
DISPLAY
SELECTION
© Siemens AG 2012 All Rights Reserved
03/2012