Siemens SINUMERIK Series Function Manual page 174

3 Setting up functions
3.4 Fault services
Function
File size per
file
Files
File type
Path
Description of "Upload HMI action log" function"
The current HMI action log file can be specifically uploaded to the ePS server with
the trigger event.
This action type has no configurable parameters.
In the column with the paper clip, the HMI action log file can be marked for sending
as an attachment for a notification of the workflow for this control monitor.
3-174
Description
Determines the maximum size for each file to
be uploaded:
The file size must be specified between 1 MB
and 10 MB.
If a file does exceed the maximum value, it will
not be loaded onto the ePS server.
A Windows file specification and ac NC file be
selected for the file type.
Shows the files entered with path details for
uploading purposes
Option: The list of specified files can be sorted
in ascending or descending order (triangle).
Deletes a file for uploading from the list.
In the line for editing, the complete path, right
up to the file to be uploaded with its file type
identifier, must be entered in DOS syntax (but
including special characters and with more
than 8 characters).
The "browse" function known from Windows to
search and select a file is not supported.
Note:
The syntax shown below, which is different,
can be used for the purpose of uploading files
from the NC file system:
../NC/Directory.dir/
Subdirectory.dir /
<file.extension>
The system automatically determines the cur-
rent storage location of the file (hard disk/NC
SRAM) and the file is loaded from there.
© Siemens AG 2012 All Rights Reserved
ePS Network Services, Function Manual (FH) - 03/2012
03/2012
Type
DISPLAY
INPUT
(Digits from 1
to 10)
SELECTION
DISPLAY
INPUT
ACTION
DISPLAY
INPUT