Siemens SINUMERIK Series Function Manual page 136

3 Setting up functions
3.4 Fault services
Notice
Due to system dependencies, repeatability of the stopwatch function is linked to
the communication runtimes, which depend on the demands placed on the inter-
face between PLC and PC of the operator. As a rule, repeats can be imple-
mented within a second, but expect several seconds with a high interface load.
Fig. 3-33: Trigger on new value of an ePS variable
Function
Name
<< x >>
Name
Details
Last
measurement
Value
3-136
Description
Name of the trigger: If this is not entered, the
trigger is named for the ePS variable.
The number in the display indicates the number
of lines per window that are shown in this menu.
You can select up to 50 lines. A scroll bar will
then be displayed in the window.
Select by clicking one ePS variable: Only one
variable can be selected.
An additional ePS variable must be selected at
the trigger menu level to generate an OR logic
operation.
Switches to the window for details of the se-
lected ePS variable.
Names of the ePS variables.
Can be sorted in ascending or descending order
of the ePS variables.
Watch – Stopwatch variable
All details of the ePS variable that can be dis-
played in the column.
Indicates when a value was last determined for
the variable.
Displays the last determined value for the ePS
variable.
ePS Network Services, Function Manual (FH) - 03/2012
Type
DISPLAY
INPUT
(max. 100
characters,
all characters
are permissi-
ble)
DISPLAY
SELECTION
ACTION
DISPLAY
ACTION
DISPLAY
DISPLAY
DISPLAY
DISPLAY
DISPLAY
© Siemens AG 2012 All Rights Reserved
03/2012