Omron Sysmac FH Series Hardware Setup Manual page 64

3 Configuration
External
Interface
3 - 4
Series
High-speed, Large-capacity
Type
Model FH-5050
Possible Number of 128
Scenes
Operating USB Yes (wired USB and driver is unnecessary type)
on UI Mouse
Touch Yes (RS-232C/USB connection: FH-MT12)
Panel
Setup Create the processing flow using Flow editing.
Language Japanese, English, Simplified Chinese, Traditional Chinese, Korean,
German, French, Spanish, Italian, Vietnamese, Polish
Serial Communication RS-232C x 1
Ethernet Protocol Non-procedure (TCP/UDP)
Commu-
I/F 1000BASE-T x 2
nication
EtherNet/IP Commu- Yes (Target/Ethernet port)
nication
•
PROFINET Commu-
Yes (Slave/Ethernet port)
•
nication
Conformance class A
EtherCAT Communi- Yes (slave)
cation
Parallel I/O 12 inputs/31 outputs: Use 1 Line. Operation mode: Except Multi-line
random-trigger mode.
17 inputs/37 outputs: Use 2 Line. Operation mode: Multi-line random-
trigger mode.
14 inputs/29 outputs: Use 3 to 4 Line. Operation mode: Multi-line ran-
dom-trigger mode.
19 inputs/34 outputs: Use 5 to 8 Line. Operation mode: Multi-line ran-
dom-trigger mode.
Encoder Interface Input voltage: 5 V ± 5%
Signal: RS-422A Line Driver Level
Phase A/B/Z: 1 MHz
Monitor Interface DVI-I output (Analog RGB & DVI-D single link) x 1
USB I/F USB2.0 host x 2 (BUS Power: 5 V/0.5 A per port)
USB3.0 host x 2 (BUS Power: 5 V/0.9 A per port)
SD Card I/F SDHC x 1
FH-5000 Series
Controller(4 cores)
FH-5050- FH-5050-
10 20
FH Series Vision System Hardware Setup Manual (Z366-E1)
FH-2000 Series
High-speed, Large-capacity
Controller(2 cores)
FH-2050- FH-2050-
FH-2050
10 20