Omron Sysmac FH Series Hardware Setup Manual page 173

• The tolerance: ±0.2 mm
l Mounting the DIN rail
Mount DIN rail mounting bracket: FH-XDM-L, to the four mount holes on the back of the Sensor
Controller.
59
• Recommended tightening torque: 0.54 to 0.6 N•m
• The tolerance: ±0.2 mm
FH Series Vision System Hardware Setup Manual (Z366-E1)
Screw for Fixing
Four, M4 x 10
FH-XDM-L
10.5
Four, M4 depth 6.5
5 Setup and Wiring
5 - 15
5