Simple Frequency Entry - Garmin GTN 725 Pilot's Manual

3.3.2

Simple Frequency Entry

Foreword
Frequencies can be entered on the GTN without the leading one and/or
Getting
trailing zero(s). As a result, the pilot can touch "2", "1", and "5" for 121.50. If a
Started
number is pressed that is not valid for the cursor location, the pilot is presented
Audio &
with a confirmation pop-up upon selecting the typed frequency. Frequency
Xpdr Ctrl
entry can be accomplished by typing every digit in the frequency or by leaving
Com/Nav
off the leading one and/or trailing zero(s). The frequency that will be entered is
always displayed in the cursor window.
FPL
1. Touch the Standby frequency field and then touch the 2 key.
Direct-To
Proc
Figure 3-14 Simplified Frequency Entry Without Leading Number
2. Touch the 7 key.
Charts
Wpt Info
Map
3. Touch the 2 key.
Traffic
Terrain
4. Touch Enter.
Weather
Nearest
Services/
Music
Utilities
System
Messages
Symbols
Appendix
3-10
Index
190-01007-03-Final.indb 10
Figure 3-15 Second Frequency Number
Figure 3-16 Final Frequency Without Trailing Number
Entered Frequency Value
Figure 3-17 Completed Frequency Entry
Garmin GTN 725/750 Pilot's Guide 190-01007-03 Rev. J
7/9/2015 2:07:00 PM