Database Verification And Fuel Settings; Utilities - Garmin GTN 625 Pilot's Manual

1.4.2

Database Verification and Fuel Settings

1. When the System and Database Version page appears, check
to ensure databases are current. Then, touch Continue.
Software and GPS
Engine Versions
Check For Any
Messages
2. When the Instrument Panel Self-Test and Fuel Setting page
appears, check to ensure that the CDI/HSI outputs and
other displayed data are correct on the external interfaced
equipment.
3. Touch each of the Fuel value keys and set the appropriate
values as desired. Fuel capacity is shown in either gallons or
pounds as set in the Units feature of System mode.
Start-Up
Instrument
Panel Test
Conditions
Figure 1-12 Instrument Panel Self-Test & Fuel Settings Page
NOTE: When the GTN is interfaced with a digital fuel computer the pilot
may not be able to manually edit the fuel flow and fuel on board data on
the Self-Test.
190-01004-03 Rev. K
Figure 1-11 System Startup Pages
Garmin GTN 625/635/650 Pilot's Guide
Check To
Ensure
Required
Databases Are
Present And
Current
Touch To
Continue To
Home Page
Touch To Set
Current Fuel
Quantity
Touch To Set
Fuel Flow
Touch To Continue
To Home Page
1-7
Foreword
Getting
Started
Audio &
Xpdr Ctrl
Com/Nav
FPL
Direct-To
Proc
Wpt Info
Map
Traffic
Terrain
Weather
Nearest
Services/
Music

Utilities

System
Messages
Symbols
Appendix
Index