Flight Plan Import/Export Messages - Garmin G950 Pilot's Manual

FLIGHT PLAN IMPORT/EXPORT MESSAGES

In some circumstances, some messages may appear in conjunction with others.
Flight Plan Import/Export Results
'Flight plan successfully imported.'
'File contained user waypoints only. User
waypoints imported successfully. No stored
flight plan data was modified.'
'No flight plan files found to import.'
'Flight plan import failed.'
'Flight plan partially imported.'
'File contained user waypoints only.'
'Too many points. Flight plan truncated.'
'Some waypoints not loaded. Waypoints
locked.'
'User waypoint database full. Not all loaded.'
'One or more user waypoints renamed.'
'Flight plan successfully exported.'
'Flight plan export failed.'
190-01146-00 Rev. A
A flight plan file stored on the SD card was successfully imported as a stored flight plan.
The file stored on the SD card did not contain a flight plan, only user waypoints. These
waypoints have been saved to the system user waypoints. No flight plans stored in the
system have been modified.
The SD card contains no flight plan data.
Flight plan data was not successfully imported from the SD card.
Some flight plan waypoints were successfully imported from the SD card, however others
had errors and were not imported. A partial stored flight plan now exists in the system.
The file stored on the SD card did not contain a flight plan, only user waypoints. One or
more of these waypoints did not import successfully.
The flight plan on the SD card contains more waypoints than the system can support. The
flight plan was imported with as many waypoints as possible.
The flight plan on the SD card contains one or more waypoints that the system cannot find
in the aviation database. The flight plan has been imported, but must be edited within the
system before it can be activated for use.
The flight plan file on the SD card contains user waypoints. The quantity of stored user
waypoints has exceeded system capacity, therefore not all the user waypoints on the SD
card have been imported. Any flight plan user waypoints that were not imported are
locked in the flight plan. The flight plan must be edited within the system before it can be
activated for use.
One or more imported user waypoints were renamed when imported due to naming
conflicts with waypoints already existing in the system.
The stored flight plan was successfully exported to the SD card.
The stored flight plan was not successfully exported to the SD card. The SD card may not
have sufficient available memory or the card may have been removed prematurely.
Garmin G950 Pilot's Guide for the Tecnam P2006T
Description
APPENDIX A
307