Notes On Instrument Safety - Zeiss Axioskop 2 plus Operating Manual

Carl Zeiss

Notes on instrument safety

The Axioskop 2 plus and Axioskop 2 mot plus microscopes have been designed produced and tested in
compliance with DIN 61010-1 (IEC 1010-1) and DIN EN 61010-2-101 safety requirements for electrical
measuring, control and laboratory instruments.
They meet the requirements of the directive 98/79/EC and are marked with the
This operation manual includes information and warnings which must be observed by the user.
The following warning and information symbols are used in this manual:
☞
NOTE
This symbol is a warning which you must observe under all circumstances.
CAUTION
This symbol is a warning which indicates a hazard to the instrument or instrument system.
CAUTION
This symbol is a warning which indicates a hazard to the user of the instrument.
CAUTION
!
Hot surface
CAUTION
UV radiation is emitted
CAUTION
Disconnect the instrument from the line before opening it!
0-8
INTRODUCTION
Notes on instrument safety
!
Axioskop 2 plus
Axioskop 2 mot plus
marking.
B 40-075 e 10/03