Connect Pc / Laptop To The Axioskop 2 Mot Plus Microscope; Attachment Of Round Cable Holder - Zeiss Axioskop 2 plus Operating Manual

Carl Zeiss
2.1.12

Connect PC / Laptop to the Axioskop 2 mot plus microscope

Fig. 2-21 Axioskop 2 mot plus (rear)
2.1.13

Attachment of round cable holder

The round cable holder supplied with the mechanical stages is suitable to hold and attach electric cables,
e.g. cables of dictating machines. The round cable holder should be adhered to a suitable place on the
microscope stand.
The round cable holder is also suitable for holding and storing the size 2 screwdriver on the microscope
stand, e.g. behind the nosepiece or at any other freely accessible position of the stand.
2-14
START-UP
Initial start-up
Connect the PC to the Axioskop 2 mot plus
microscope via the RS-232 serial interface (2-21/2)
on the instrument rear.
Other interfaces on the instrument rear are
designed as SUB-BUS (2-21/3) and combined
CAN/SUB-BUS (2-21/1) connectors.
Axioskop 2 plus
Axioskop 2 mot plus
B 40-075 e 10/03