Figure 3-3 Network And Sharing Center; Figure 3-4 Lan Properties - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

S E T T I N G U P T H E M A X P R O N V R
3
Setting up the MAXPRO NVR Turnkey Box Solutions
Note:
If more than one MAXPRO NVR unit is on the same network, you must assign a unique IP
address and computer name to each unit (the default name is MAXPRO-NVR).
C ha n g i n g t he I P a d d re s s
1.
Figure 3-3
2.
Figure 3-4
3.
50
NIC2 may not be available on all NVR options, please refer to the data sheet for
more information.
Click the network icon in the notification area, click Open Network and Sharing
Center (See Figure 3-3), and then click Change adapter settings.
Network and Sharing Center
Right-click Camera Network or Client Workstation Network, and then click Properties.
The Local Area Connection Properties dialog box (Similar to
LAN Properties
Click Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
Figure 3-4) appears.
MAXPRO NVR 5.0 Installation and Configuration Guide