Updating The Cameras; Deleting The Cameras; Configuring The Schedules; Creating A Schedule - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

C O N F I G U R I N G M A X P R O N V R
6

Configuring the Schedules

7.

Updating the Cameras

You can modify the settings of a camera to change the camera name, IP address, camera
type, fixed/PTZ, advanced camera settings, and so on. You can update the camera settings
only if you have admin rights.
To update a camera
1.
2.
3.
4.
5.

Deleting the Cameras

1.
2.
3.
4.
5.

Configuring the Schedules

A schedule defines the date and times when continuous recording and video analytics
(motion detection) functions are enabled for a camera. You can create schedules for
camera(s) to record video at recurring intervals for continuous recording or event based
recording (for example, motion event). There are four default schedules: 24 x 7, Weekday,
DayTime, NightTime.

Creating a Schedule

You can create schedules for the camera to record video at recurring intervals.
1.
174
Click Save to save the changes or click Cancel to abort the changes.
Click the Configurator tab. The System page displays by default.
Click the Camera tab to navigate to the Camera page. The list of cameras configured are
displayed.
Select the row corresponding to the camera you want to modify.
Change the settings such as camera name, IP address, and so on.
Click Save.
Click the Configurator tab. The System page displays by default.
Click the Camera tab to navigate to the Camera page.
Select the check box corresponding to the camera you want to delete.
Click Delete. A confirmation message appears at the bottom of the display area.
Click Yes. The selected camera is deleted.
Click the Configurator tab. The System page displays by default.
MAXPRO NVR 5.0 Installation and Configuration Guide