Logging Off; Closing The Maxpro®Nvr User Interface - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

L O G G I N G O N A N D G E T T I N G S T A R T E D
5
Licensing Information
Note:
9.
10.
11.

Logging off

You can log off from MAXPRO NVR from the User menu. The name of the currently connected
user is displayed as the User menu on the top right of each screen.
1.
2.
Closing the MAXPRO®NVR User Interface
You can close the MAXPRO NVR user interface from the User menu. The name of the currently
connected user is displayed as the User menu on the top right of each screen.
1.
2.
3.
108
Any discrepancy in the license must be reported to Honeywell Sales Support. For
example, the Maximum supported cameras row under the Selected License
column displays the number of cameras for which the license is purchased. If the
number of cameras is less or more than the number of cameras for which the
license was purchased, contact Honeywell Sales Support immediately.
On the Device Configuration Changes dialog box, check that the details are accurate,
and then click Next.
On the Confirm New License dialog, click Finish.
On the New License Configuration Wizard dialog box, click Yes.
Click the User menu,
Click Log Off. The Log on dialog box appears after logging off from MAXPRO NVR.
Click the User menu,
Click Exit. A dialog box appears prompting you to confirm the action.
Click Yes.
. The user menu options appear.
. The user menu options appear.
MAXPRO NVR 5.0 Installation and Configuration Guide