Figure 11-8 Connect As Dialog; Figure 11-9 Set Credentials Dialog - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

S E C U R I N G M A X P R O N V R
1 1
Changing the default Windows Password for Windows Logon user on MAXPRO NVR
4.
Figure 11-8
5.
Figure 11-9
6.
7.
8.
To reset the Cache credentials for Application Pools, perform the following:
1.
272
Click Connect as..., the Connect As dialog appears
Connect As Dialog
Click Set. The Set Credentials dialog appears
Set Credentials Dialog
Type the User name in the box provided.
Type the new Password in the box provided. The new password should contain Minimum
12 character length, one number, one uppercase letter and one special character.
Confirm the password and then click OK. Similarly perform the above steps to reset the
cache password for other applications that uses the user credentials to authenticate.
Click Start>Control Panel>Administrative Tools> Internet Information Services (IIS)
Manager. The Internet Information Services (IIS) Manager window is displayed.
Figure 11-8.
Figure 11-9.
MAXPRO NVR 5.0 Installation and Configuration Guide