S
ETTING UP THE
Chapter Overview
This chapter describes the settings for setting up the MAXPRO NVR system.
Setting up the MAXPRO NVR Turnkey Box
Solutions
Setting up the MAXPRO NVR unit and client computers is the first phase in the commissioning
process.
Refer to the specific
(www.honeywellvideo.com) for information on hardware specifications for the MAXPRO NVR
unit.
Typical MAXPRO NVR System Diagram
The following figure illustrates the MAXPRO NVR SE system diagram.
Figure 3-1
MAXPRO NVR 5.0 Installation and Configuration Guide
MAXPRO NVR
•
For setting up the MAXPRO NVR Single-box solution, see the
MAXPRO NVR Turnkey Box Solutions
•
For setting up the MAXPRO NVR Software-Only solution, see the
MAXPRO NVR Software-Only Solution
•
For setting up a peripheral Joystick Controller, see the
Controller
section on page 62.
MAXPRO NVR Data Sheet
Typical MAXPRO NVR System Diagram
Setting up the
section on page 47.
Setting up the
section on page 52.
Connecting the Joystick
on Honeywell Video web site.
3
47