Figure 6-32 Dewarping Success Message - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

MAXPRO NVR 5.0 Installation and Configuration Guide
Figure 6-32 Dewarping Success Message
6. After successful download of configuration, click Save.
7. Under General > 360 Settings
• Select the Mounting Position. You have three options to choose from: Wall,
Ceiling, and Ground. Based on the mounting position the views are displayed.
• Select the Mode for the camera. The available modes are FishEye Mode, Quad
Mode, and Perimeter Mode. The default mode is FishEye Mode.
Note:
Based on the Mounting Position the modes/views are displayed.
• Lens ID for the camera is disabled.
8. Click Save to complete the configuration.
C O N F I G U R I N G M A X P R O N V R
Configuring the Cameras
157