Updating the Unique system ID for Specific Camer as
MAXPRO NVR 5.0 Installation and Configuration Guide
Figure A-10
Define Unique ID screen
7.
Click Run to execute the utility.
Or
Click Back togo back to home screen to change the settings.
To update the Unique system ID for Specific Cameras
1.
Perform step 1 through step 3 of
on page 322.
2.
Click Specific Camera(s) option, and then click Next. The next screen for the utility is
displayed and the New Unique ID column for all the cameras is displayed blank as
shown below.
Scheduled Metadata and Database Backup
Updating the Unique system ID for all Cameras
A P P E N D I X A
section
323