Figure 5-2 Server Settings Dialog Box; Figure 5-3 Setting The Default Profile - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

Setting the Default Profile
MAXPRO NVR 5.0 Installation and Configuration Guide
2. Click Server Settings. The Server Settings dialog box appears
Figure 5-2 Server Settings dialog box
3. Click Add.
4. Type the Profile Name to identify the profile.
5. Type the Server IP/Name (numerical IP address or the network name of the MAXPRO
NVR server).
6. Click Save.
7. Click OK. The server address is saved in the profile.
Tip: You can click Set Default in the server settings dialog box to set the profile as the default
profile.
To set the default profile
1. Select the profile you want to set as default before logging on to the MAXPRO NVR.
2. In the User menu,
default profile. The default profile appears selected in the Profile box in the Log On
dialog box.
Figure 5-3 Setting the Default Profile
L O G G I N G O N A N D G E T T I N G S T A R T E D
, click Profiles > Set Default Profile. The profile is set as the
Logging on Using Profiles
(Figure 5-2).
87