Figure 6-31 Equip- Fisheye Camera Settings - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

C O N F I G U R I N G M A X P R O N V R
6
Configuring the Cameras
2.
Figure 6-31
3.
4.
5.
Note:
156
On the Camera page, for the New EquIP Fisheye Model (HFD6GR1) camera, click
the left corner to open the camera properties pane see
EquIP- Fisheye camera Settings
Under General > 360 Settings, select the Enable check box to enable the dewarping
feature.
Under General > 360 Settings
• Select the Mounting Position. You have three options to choose from: Wall, Ceiling,
and Ground. Based on the mounting position the views are displayed.
Click the Get Configuration button. The dewarping configuration takes a while to
download the dewarping configuration. A message Successfully downloaded
configuration is displayed in the bottom of the camera screen.
For each Mounting Position, you need to click Get Configuration button to
download the corresponding configuration.
Figure 6-12.
MAXPRO NVR 5.0 Installation and Configuration Guide
on