Nvrtestuser) - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

S E C U R I N G M A X P R O N V R
1 1
Step 9: Update the user credentials of Task Schedules with new user account (For EX: NVRTestUser)
Step 9: Update the user credentials of Task
Schedules with new user account (For EX:

NVRTestUser)

After performing the above 8 steps, you need to update the user name and password of the
following Task Schedules with new user account created in
account with administrator privileges
To update the Task Schedule credentials:
1.
2.
3.
262
• IISRecovery
• MaxBootAssistant
• TrinityBackupScheduler
Click Start > Run. In Run command window, type Taskschd.msc. The Task Scheduler
window is displayed.
Navigate to Task Scheduler Library node on the left pane. The task schedules are
displayed on the right pane as shown below.
Right click IISRecovery and then select Properties. The IISRecovery Properties dialog
box appears as shown below. By default the General tab is selected.
Step 1: Create a new user
section on page 256:
MAXPRO NVR 5.0 Installation and Configuration Guide