Omron NT631 Series Reference Manual page 57

Areas for Control/Notification
48
Downloaded from Elcodis.com electronic components distributor
by the setting for numeral storage type in the PT configuration settings made
with the Support Tool.
Designated screen
Screen Switch Setting In The PT Status Control Area
15 14 13 12 11 10 9
Word
n
The screen numbers that can be set are as follows.
BCD Hexadecimal
0000 0000
0001 to
0001 to 0F9F
3999
9001 2329
9002 232A
9020 233C
9021 233D
9022 233E
9023 233F
9030 2346
S The screen can also be switched by bit memory table operation (page 289), by
Reference:
touch switch operation (page 290), or by using the alarm list/history function
(page 292).
S To display overlapping screens, designate the screen number of the parent
screen.
S If there are no elements registered for the designated screen number, or if a
keyboard screen is designated, the screen does not switch.
S When the PT starts operating, the screen is displayed according to the con-
tents of the screen switch setting word. If the contents of the screen switch set-
ting word are invalid, the screen is displayed according to the Initial Screen in
the PT configuration settings made at the Support Tool. If the setting for Initial
Screen is also invalid, an error message is displayed.
S The PT will continue operating when the Programming Console function or De-
vice Monitor function is called with a command from the host, but even though
the Programming Console or Device Monitor screen is displayed, it will be
skipped if you attempt to go back to it with a return to previous screen touch
switch.
PT
8 7 6 5
Screen number (4-digit BCD or hexadecimal)
No-display (screen cleared)
Screen numbers 1 to 3,999
Occurrence history screen
Frequency history screen
Programming Console function screen
Device Monitor function:
Device Monitor function:
Device Monitor function:
Brightness and contrast adjustment screen
Section
PC
PT status control area
← Screen number
Screen switch setting
Copy memory
table setting
PT status control setting
Reserved for system use
4 3 2 1 0 Bit
Screen switch setting
Screen
Registration monitor screen
Continuous monitor screen
Error log screen
2-2