Omron NT631 Series Reference Manual page 173

Graphs
164
Downloaded from Elcodis.com electronic components distributor
*1: The –100% value, 0% value, and 100% value must comply with the following
relationship:
When a table entry is specified for the % value, the relationship above will not be
satisfied if the contents of the specified numeral memory table are incorrect. In
this case, the graph won't be refreshed even if the values displayed on the graph
are changed.
S The graph's % values are always displayed with the standard display attrib-
Reference:
utes. These display attributes cannot be changed.
Logging
Data Logging
Background
*2
Forward
Rewind
Clear Log
Touch Switches for Display Function
Stop
Clear
Display
Continue
The line thickness for trend graphs is fixed as 1 dot.
–100% value < 0% value < 100% value
Whether or not the logging function is used (Data logging
function and background function, page 168)
Check mark (logging function used)/
No check mark (logging function not used)
Whether or not the background function is used (Data logging
function and background function, page 168)
Check mark (background function used)/
No check mark (background function not used)
*2
Presence/absence of a touch switch to proceed to the next
page
Check mark (touch switch set)/
No check mark (touch switch not set)
*2
Presence/absence of a touch switch to return to the previous
page
Check mark (touch switch set)/
No check mark (touch switch not set)
*2
Presence/absence of a touch switch to clear the logging data
Check mark (touch switch set)/
No check mark (touch switch not set)
Presence/absence of a touch switch to stop data sampling
Check mark (touch switch set)/
No check mark (touch switch not set)
Presence/absence of a touch switch to clear the trend graph
display
Check mark (touch switch set)/
No check mark (touch switch not set)
Presence/absence of a touch switch to restart data sampling
Check mark (touch switch set)/
No check mark (touch switch not set)
Section 2-10