Operation Outline - Omron NT631 Series Reference Manual

Recipe
Elements Configuration Table
Table format
Special
recipe
touch
switches i h

2-14-2 Operation Outline

Initial Settings Using the Support Tool
Downloaded from Elcodis.com electronic components distributor
Recipe data Recipe data name
(1 d (1 data in i
Recipe data comment
table
format) format)
Storage type of allocated words in host
(can be specified for each recipe data)
Name field Record name
Parameter name
Parameter Initial values
field
Scroll touch
Page scroll touch
switches switches for
records
Page scroll touch
switches for
parameters
Line scroll touch
switches for
records
Line scroll touch
switches for
parameters
Read and
Write touch switch
Write touch
switches it h
Read touch switch
Record selecting touch switches
Parameter editing touch switch
Reference: You can also select not to display parameters in units of recipe data, using recipe
element settings in the Support Tool.
You can also select not to display serial numbers to the left of record names, us-
ing Support Tool settings.
The basic recipe element operations are given below.
1, 2, 3... 1. Recipe Table (Total Recipe Data) Settings
When creating recipe tables using the Support Tool, set the parameter val-
ues, recipe data name, recipe data comments, record names, and parame-
ter names.
Displays records as rows, and parameters as
columns.
You can attach a table name to the top left.
You can attach a comment about the table (not
displayed on PT screen).
Select from BCD, binary, or system setting.
You can display a comment for each record at
the start of the row. Has a record selecting
touch switch.
You can display a comment for each parameter
at the start of the column.
The initial values are set in the screen data sent
to the PT. Thereafter, you can change the data
by performing an operation from the PT, or
exchanging data with the host.
The column contains touch switches for editing
parameters.
Take the number of records displayed to be 1
page, and then scroll 1 page up or down at a
time.
Take number of parameters displayed to be 1
page, and then scroll 1 page sideways at a
time.
Scroll 1 record up or down.
Scroll 1 parameter sideways.
Writes record data selected using the record
Write
selecting touch switches to the host.
Reads the record data selected using the record
Read
selecting touch switches from the host.
Touch switch for the record name field.
Record n name
Use to select the target record when reading
and writing from/to the host by touch switch
operation.
Touch switch in the parameter field.
Value
Press this touch switch to enable input in the
parameter field. You can also open a window
specified for inputting values at the same time.
Section 2-14
211