Omron NT631 Series Reference Manual page 447

Compatibility with Screen Data of Other PT Models
Limitations of System Program/PT Combinations
The following table shows only the relationship between the hardware and system program.
For details of the relationship with the screen data created using the Support Tool, refer to NT-series Support Tool
for Windows (Ver. 4.1) Operation Manual.
Combining a -V1 Version and Version without a -Vj Suffix
Software Software
System program Ver. 1.0j
System program Ver. 2.0j or Ver. 2.1j
The system program's version can be checked from the System Menu.
*
Combining a -V1 Version and -V2 Version
Software Software
System program Ver. 2.0j or Ver. 2.1j
System program Ver. 3.1j
The system program's version can be checked from the System Menu.
*
438
Downloaded from Elcodis.com electronic components distributor
NT31-ST121j-E
NT31C-ST141j-E
NT631-ST211j-E
NT631C-ST141j-E
NT631C-ST151j-E
The following functions can not be used
S Analogue meter
S High-definition font display
S Installation of system programs using memory unit
S Connection to Mitsubishi PLCs
S Memory link
S Window control from the host
S Multiple display of window screens
S Moving a window
S Refer to the following table for details on new
functions supported by the -V2 versions.
The following functions can not be used
S Installation of system programs using memory unit
S High-definition font display*
S Refer to the following table for details on new
functions supported by the -V2 versions.
NT31-ST121j-EV1
NT31C-ST141j-EV1
NT631-ST211j-EV1
NT631C-ST141j-EV1
NT631C-ST151j-EV1
The following functions (new functions supported by the -V2) cannot be used:
S Additional data areas accessible in CS1-series PCs
S The CS1-series high-speed 1:N NT Link
S Installation of system programs using memory unit
S Interlock function that controls touch switches, numeral inputs, and character string inputs
S Mathematical function
S Device Monitor function
S Recipe function
S NT30/620 compatible mode
S Expanded capabilities for label (guide character) displays, including multiple lines of text, ON/OFF switching
displays, numeral memory table displays, and character string memory tables
All of the functions described in the Setup Manual and Reference Manual can be used.
Hardware
NT31-ST121j-EV1
NT31C-ST141j-EV1
NT631-ST211j-EV1
NT631C-ST141j-EV1
NT631C-ST151j-EV1
The following functions can not be used
S Analogue meter
S High-definition font display
S Connection to Mitsubishi PLCs
S Memory link
S Window control from the host
S Multiple display of window screens
S Moving a window
S Refer to the following table for details on new
functions supported by the -V2 versions.
* Installation of system programs using memory unit
is possible
The new functions supported by the -V2 versions
cannot be used. Refer to the following table for details.
Hardware
NT31-ST121j-EV2
NT31C-ST141j-EV2
NT631-ST211j-EV2
NT631C-ST141j-EV2
NT631C-ST151j-EV2
Appendix B