Omron NT631 Series Reference Manual page 72

Areas for Control/Notification
Downloaded from Elcodis.com electronic components distributor
Screen No.. X Coordinate and Y Coordinate of The Window Control Area
15 14
Word
k k+3 k+6
k+1 k+4 k+7
k+2 k+5 k+8
Grobal Local Local
Window Window1 Window2
When The Data is Written From The PT
When the display status of the window is changed by the operation at PT, new
window screen No. or coordinates is written to the window No.. X coordinate or Y
coordinate as 4-digits BCD or hexadecimal from the PT. When the window is
opened or closed, window open/close status is written to the window open status
(page 303) of PT status in PT notify area.
Whether the values are BCD or hexadecimal is determined by the setting for nu-
meral storage type in the PT configuration settings made with the Support Tool.
PT
Window open Local Window2 opens
touch switch (Window screen No.314)
open
Bottom left coordinate (200, 219)
13 12 11 10 9 8 7 6 5
Screen No. (4-digit BCD or hexadecimal)
X coordinate (4-digit BCD or hexadecimal)
Y coordinate (4-digit BCD or hexadecimal)
PC
Window control area
0314 Screen No.
0200
X coordinate
0219 Y coordinate
PT notify area
Local Window2
PT status
Open Status
Section 2-2
4 3 2 1 0 Bit
Local Window2
63