Omron NT631 Series Reference Manual page 92

Fixed Displays
Downloaded from Elcodis.com electronic components distributor
Attribute
Flash Repeated alternation between standard display and
no display.
Inverse Flash Repeated alternation between inverse and standard
display.
Circle
The relationship between the properties of a circle and the displayed graphic are
indicated below.
Properties
General
Position
Center point Coordinates of the center of the circle
Size
Radius Radius of the circle (dot units)
Attribute Display mode for the circle (Display attribute and drawing
result, page 83).
Standard/Inverse/Flash/Inverse Flash
Color
Foreground Display color of the circle (Colors other than black and white
are available with the NT31C and NT631C only.)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
The line style is fixed as solid line and thickness is fixed as one dot.
At the Support Tool, the center point and radius are specified as shown be-
low.
Radius
Display Attribute and Drawing Result
Attribute
Standard Only the line of the circle periphery is drawn in the
foreground color.
Inverse The entire circle is displayed in the foreground color.
Section
Drawing Result
⇔ No display
⇔
Center point
Drawing Result
2-4
83