Omron NT631 Series Reference Manual page 154

Graphs
Common Attributes
Downloaded from Elcodis.com electronic components distributor
The relationship between the properties of a bar graph and the display results is
indicated below.
Properties
General
Position
Size
Frame
Display Sign
Direction
Color
Frame
+ Range
– Range
Settings
Value
Table Entry
Display %
*1
100% (Specify 100% value using either of Table Entry or Value.)
Table Entry
Value
Reference: The graph's % values are always displayed with the standard display attributes.
These display attributes cannot be changed.
Coordinates of the top left corner of the bar graph area.
Width and height of the area in which the bar graph is displayed
(dot units)
NT31/NT31C: Width 2 to 230, Height 2 to 240
NT631/NT631C: Width 2 to 640, Height 2 to 480
Whether or not a frame is displayed for the graph area
Check mark (frame displayed)/
No check mark (frame not displayed)
Whether or not a negative area is displayed.
Check mark (displayed)/No check mark (not displayed)
Direction in which the bar graph extends (Incremental Direction
of Bar Graphs, page 147)
Up/Down/Left/Right
Display color of the frame (Colors other than black and white are
available with the NT31C and NT631C only.)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
Display color of the positive range (Colors other than black and
white are available with the NT31C and NT631C only.)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
Display color of the negative range (Colors other than black
and white are available with the NT31C and NT631C only.)
(effective only when a check mark is set for Display Sign)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
Number of numeral memory table whose contents are to be dis-
played.
Presence/absence of a percentage indication of the contents of
the numeral memory table (Method for calculating the percent-
age value, page 147)
Check mark (percentage displayed)/
No check mark (no percentage display)
For details on the Display % properties, refer to the Text (Fixed
Display) on page 88.
Numeral memory table number checked to find the 100%
value for percentage calculations
@ Designate the number of the numeral memory table that
stores the 100% value.
Range: 0 to 1999
Checked to find the 100% value for percentage calculations
@ Designate the 100% value (default: 100)
Range: –2147483648 to 2147483647
Section 2-10
145