Table of Contents
Advertisement
Graphs
150
Downloaded from
Elcodis.com
electronic components distributor
General
Meter Color
Foreground
Foreground color for the present value (needle or fill) of the
meter part (Colors other than black and white are available
with the NT31C and NT631C only.)
Black/Blue/Red Magenta/Green/Cyan/Yellow/White
Background Background color of the analogue meter (Colors other than
black and white are available with the NT31C and NT631C
only.)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
+Range
Display color for the positive range (Colors other than black
and white are available with the NT31C and NT631C only.)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
–Range
Display color for the negative range (Colors other than black
and white are available with the NT31C and NT631C only.)
(effective only when a check mark is set for Display Sign)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
Settings
Value
Table Entry
Number of numeral memory table whose contents are to be
displayed.
Display %
Presence/absence of a percentage indication of the contents
of the numeral memory table (Method for calculating the
percentage value, page 152)
Check mark (percentage displayed)/
No check mark (no percentage displayed)
For details on the Display % properties, refer to the Numeral
Display's General Properties on page 131.
100% *1 (Specify 100% value using either of Table Entry or Value.)
Table Entry
Numeral memory table number check to find the 100% value
for percentage calculation
Designate the number of the numeral memory table that
stores the 100% value.
Range: 0 to 1999
Value
Check to find the 100% value for percentage calculation
Designate the 100% value (default: 100)
Range: -2147483648 to 2147483647
0% *1 (Specify 0% value using either of Table Entry or Value.)
Table Entry
Numeral memory table number check to find the 0% value for
percentage calculation
Designate the number of the numeral memory table that
stores the 0% value.
Range: 0 to 1999
Value
Check to find the 0% value for percentage calculation
Designate the 0% value (default: 0)
Range: -2147483648 to 2147483647
-100% *1 (Specify -100% value using either of Table Entry or Value.)
Table Entry
Numeral memory table number check to find the –100% value
for percentage calculation
Designate the number of the numeral memory table that
stores the –100% value.
Range: 0 to 1999
Value
Check to find the –100% value for percentage calculation
Designate the –100% value (default: –100)
Range: -2147483648 to 2147483647
*1: The –100% value, 0% value, and 100% value must comply with the following
relationship:
–100% value < 0% value < 100% value
Section
2-10
Advertisement
Chapters
Table of Contents
Troubleshooting
