Xilinx Spartan-3A User Manual page 14

Chapter 1: Introduction and Overview
6.
7.
8.
9.
10. Optionally connect a PC directly to the board using a standard 9-pin serial cable.
For more information on the demonstration design, visit the Design Examples web page:
•
•
14
Turn on the power switch.
The character LCD and VGA display, if connected, display various informational
messages and instructions. If an audio device is connected, the board offers words of
welcome in a variety of languages.
Use the rotary/push-button switch to control various board functions.
Optionally connect a PS/2-style keyboard to support one of the included
demonstrating designs.
Power Supply Jumpers
(all jumpers installed)
J42 J41
J40
J13
J12
J11
J10 J9
Figure 1-2: Default Jumper Settings for Starter Kit Board
Spartan-3A/3AN Starter Kit Demo Design Overview
www.xilinx.com/products/boards/s3astarter/reference_designs.htm#demo
Restoring the "Out of the Box" Flash Programming
www.xilinx.com/products/boards/s3astarter/reference_designs.htm#out
www.xilinx.com
SPI Flash Select Jumpers
(both jumpers installed, vertically)
Platform Flash Jumper
(jumper removed)
DONE
CE
PROM
GND
J46
M0
M1
M2
J26
FPGA Mode Select Jumpers
(bottom two jumpers installed)
(SPI Mode)
Spartan-3A/3AN Starter Kit Board User Guide
R
J1
UG334_c1_02_052707
UG334 (v1.0) May 28, 2007