Chapter 12: SPI Serial Flash
Indirect SPI Flash Programming Using iMPACT
To program the attached and selected SPI PROM using the iMPACT software and the
Indirect programming method, follow the steps outlined below.
1.
2.
102
Invoke iMPACT and select Configure devices using Boundary Scan (JTAG), as
shown in
Figure
12-11.
1
Figure 12-11: Indirect Programming Method Uses JTAG
Select Finish.
www.xilinx.com
2
Spartan-3A/3AN Starter Kit Board User Guide
R
UG332_c4_22_032807
UG334 (v1.0) May 28, 2007