Linking Inputs As A Stereo Pair - Zoom F6 Operation Manual

Linking inputs as a stereo pair

By enabling the stereo link for tracks 1/2, 3/4 or 5/6, the corresponding Inputs (1/2, 3/4 or 5/6) can be handled as a stereo pair.
When linked, Input 1, 3 or 5 will be the left channel and Input 2, 4 or 6 will be the right channel.
■ MS stereo format overview
This method takes input from a direction-
al mid mic, which captures sound in the
center, and a bidirectional side mic, which
captures sounds from the left and right,
and converts it to stereo.
The stereo width can be changed as de-
sired by adjusting the side mic level.
Since this method can capture a wide
stereo image, it is ideal for recording
large open spaces with numerous sound
sources, including orchestras, live con-
certs and soundscapes.
This technique is also extremely effective
when you want to adjust room ambience.
Since it offers a high degree of freedom, it is used not only in studios
but also for a wide range of recording, even for rehearsals and live per-
formances.
1.
Mid mic
2.
Side mic
M S+ S-
Master
3.
Phase Phase Phase
Pan Pan Pan L R
96
Press .
Use and to select
INPUT, and press .
Use and to select Link
Settings, and press .