Zoom F6 Operation Manual page 25

■ Adjusting input levels
1.
Press .
2.
Use and to select
INPUT, and press
3.
Use and to select
PFL, and press .
4.
Use and to select the
desired track, and press
.
.
5.
Use and
Trim, and press
6.
Use and
input level, and press
HINT
• • This can be set in a range from +12 to +75 dB when the input source is
set to Mic, from –8 to +55 dB when set to Line, and from –35 to +30 dB
when set to USB.
• • If the sound distorts even after lowering the input level, try changing mic
positions and adjusting the output levels of connected devices.
• • Using the limiter ( → P. 84)
• • Using the high pass filter ( → P. 82)
25
to select
.
to adjust the
.