Connecting Mics/Other Devices To Inputs 1-4; Connecting Mics; Connecting Instruments/Other Devices; Stereo Inputs - Zoom H6 Operation Manual

Connecting mics/other devices to Inputs 1–4
In addition to the input (L/R) from an XY or MS mic, the
These can be used together to record up to six tracks at one time.
Mics, instruments and other equipment can be connected to Inputs 1–4 and recorded independently to tracks 1–4.
Input 1
PAD switch
Input 2

Connecting mics

Connect dynamic mics and condenser mics to the Input 1–4
XLR jacks.
Phantom power (+12V/+24V/+48V) can be supplied to con-
denser mics. (s"P .87)
10
also has Inputs 1–4.

Connecting instruments/other devices

Connect keyboards and mixers directly to the Input 1–4 TRS
jacks.
L/R inputs
Direct input of passive guitars and basses is not supported.
Connect these instruments through a mixer or effects device,
for example.
Set the PAD switch to −20 when connecting a mixer or other
device with a standard output level of +4dB.
Input 3

Stereo inputs

By linking tracks 1 and 2 (or tracks 3 and 4) as a stereo tracks,
Input 4
Inputs 1/2 (or Inputs 3/4) can be used for stereo input. (s"
P .26)
In this case, Input 1 (Input 3) becomes the left channel and
Input 2 (Input 4) becomes the right channel.