Setting The Attack Time; Setting The Release Time - Zoom F6 Operation Manual

■ Setting the attack time

This sets the amount of time until compression starts after the input
signal exceeds the threshold.
7.
Use and to select
Attack Time, and press
8.
Use and to adjust
the time, and press
HINT
This can be set from 1 to 4 ms.
NOTE
This setting becomes available when On/Off is set to On (Normal).
.
.

■ Setting the release time

This sets the amount of time until compression stops after the input
signal goes below the threshold.
7.
Use and
Release Time, and press
8.
Use and
the time, and press
HINT
Limiter operation is linked for tracks that have stereo link or MS stereo link
enabled. If the signal for either linked channel reaches the threshold, the
limiter will operate on both tracks.
NOTE
This setting becomes available when On/Off is set to On (Normal).
88
to select
.
to adjust
.