Audio Interface Settings - Zoom F6 Operation Manual

Audio interface settings

The following settings can be made when using the
■ Setting loop back (Stereo Mix only)
This function mixes the playback sound from the computer or iOS de-
vice with the input and sends the mix back to the computer or iOS
device (loop back).
This function can be used to add narration to music played back from
the computer and to record the mix or stream it on the computer, for
example.
1.
Press .
2.
Use and to select
LOOP BACK, and press
3.
Use and to select
On, and press .
as an audio interface.
.
■ Mixing inputs
The mix balance of the inputs can be adjusted. Input signals will be
sent to the computer or iOS device using the balance settings made
here. When using a Stereo Mix setting, the mixed stereo signal will be
sent.
1.
Open the mixer on the Home
Screen ( → P. 10).
2.
Adjust the parameter settings.
See "Adjusting the input signal monitoring balance" ( → P. 76)
for how to change settings.
142